Quantum DAT 40 Drive Uživatelská příručka stáhnout pdf (Strana 16)

Scorpion 40 configurations for Windows NT, Novell, and UNIX 13

Configurations for the HP-UX environment

Dip switch settings

Before using the Scorpion 40 in an HP UNIX environment, set the

operating-system configuration dip switches as shown below:

Operating System / tape

driver software

Switch

HP UNIX

ON ON OFF ON

HP-UX Versions 10.2 and 11:

Follow the steps below to configure these HP-UX systems:

1. Log in as root.

2. Run the SAM utility.

3. Choose the Peripheral Devices option.

4. Choose Tape Drives.

5. From the Actions menu in the Tape Device Manager window,

choose Add.

6. Within the Add a Tape Drive window, read the instructions, then

click on OK

7. SAM may detect that your HP-UX kernel lacks the drivers

necessary to make use of your new tape drive. If so, within the

“Device Driver Check” window, read the message and choose

the appropriate action. If the chosen option is Build a new kernel

and shut down the system immediately, SAM will create a new

kernel, and automatically reboot the system. Once the system

comes back up, the necessary drivers will be loaded, and the

system will be able to use the tape drive.

8. If you had to shut down the system in order to physically connect

the tape drive, re-enter SAM and repeat steps 3 through 6 above.

9. Choose the new tape drive.

10. From the

Actions

menu, choose

Create Device Files.

11. Press OK and then exit from SAM.

1 2 ... 11 12 13 14 15 16 17 18 19

Žádné komentáře

Quantum DAT 40 Drive Uživatelská příručka Strana 16