Quantum DAT72 Uživatelská příručka Strana 17

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 81
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 16
Chapter 1 Quick Start Installation
Installing the Internal Tape Drive
DDS-4/DAT 72 User’s Guide 5
Installing the Internal Tape Drive 1
Use the following procedure to install the internal tape drive (either SCSI
or SATA interface). Print this page and check each step as you complete
it. If you need more information about a step, turn to the section
referenced in the step.
1 Unpack the contents of your drive package, and check for missing or
damaged items.
2 Identify any other items you need to perform this installation (see
What Else You Need
on page 10).
3 Collect the tools you will need to perform the installation (see
Collecting the Necessary Tools
on page 12).
4 Observe Electrostatic precautions when handling the internal tape
drive (see Avoiding Electrostatic Damage
on page 10).
5 For SCSI drives only — Review the drive’s default settings and
change them if necessary:
SCSI ID: 6
Parity Checking: Enabled
Terminator Power: Disabled
Data Compression: Enabled
Media Recognition (DDS-4 drives only): Enabled
Power-On Self-Test: Enabled
Host Operating System: Windows 98/Me/XP/NT/2000/2003
Server
For SCSI drives only — SCSI Interface Compatibility (DDS-4
drives only): Wide SCSI
Vendor ID: SEAGATE DAT
6 Turn off your computer, remove its covers and power cable.
Depending on your drive, select a 3.5-inch or 5.25-inch bay.
7 Mount the drive into the bay and secure using the supplied screws.
8 For SCSI drives only —
Zobrazit stránku 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 80 81

Komentáře k této Příručce

Žádné komentáře