Quantum Scalar i2000 Uživatelská příručka Strana 165

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 544
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 164
Chapter 4 Configuring Your Library
Managing Connectivity
Scalar i6000 User’s Guide 152
For an FC port on either the MCB or an I/O blade, the Fibre Channel
Parameters dialog box appears.
You can configure two settings for an MCB connection and all
settings for an I/O blade connection. The figure above shows an FC
port configured for target mode and a loop preferred connection.
a In the Loop ID area of the Fibre Channel Parameters dialog box,
repeatedly selecting Soft acts as a toggle, checking and clearing
the box. If the box is not checked, you can click a hard loop ID
(within the range from 0 to 125) from the drop-down list. Some
operating systems require hard ID settings. Consult your service
representative before making changes to this setting.
b Select Auto to automatically set the interface speed. To configure
the speed manually, clear the Auto check box and use a setting
from the drop-down list. Because this setting is not configurable
Zobrazit stránku 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 543 544

Komentáře k této Příručce

Žádné komentáře