Quantum PX502 Uživatelská příručka Strana 202

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 294
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 201
Chapter 5 Troubleshooting
Common Problems and Solutions
Quantum PX500 Series User’s Guide 179
OCP Problems 5
Table 32 describes corrective actions for OCP problems.
Table 32 OCP Problems
Robotics (Gripper)
Problems 5
Table 33 describes corrective actions for robotics or gripper problems.
Problem Corrective Action
The OCP is blank. Physically remove the AC power by removing
all power cords from the power supply(s) and
reconnect them.
Confirm that power is on and if the OCP is still
blank, contact an authorized Quantum field
service engineer (see
Contacts on page xix).
The OCP does not
respond to
buttons.
Verify that the buttons are not stuck
underneath the front bezel.
Physically remove the AC power by removing
all power cords from the power supply(s) and
reconnect them. Power the library on and if the
OCP still does not respond to buttons, contact
an authorized Quantum field service engineer
(see
Contacts on page xix).
An error number
or event is
displayed.
Write down the error number and contact an
authorized Quantum field service engineer (see
Contacts on page xix).
Zobrazit stránku 201
1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 293 294

Komentáře k této Příručce

Žádné komentáře