Quantum P1000 Uživatelská příručka stáhnout pdf (Strana 115)

Appendix B Installing the Slide Assembly in the Rack

Determining the Mounting Position

ATL P1000 Series User’s Guide 99

Determining the Mounting Position

To determine the mounting position of the slide assembly within the

rack:

Procedure

Locate the desired mounting position for the library (see figure 54).

The library and slide assembly require at least 21 in. (54 cm or 12

rack units) of vertical clearance. To ensure stability, mount the

library low in the rack.

Figure 54 Positioning the

Slide Assembly

As indicated in figure 54, the bottom edge of each slide assembly

bracket must line up with the end of a rack unit.

If the rack retma rail holes are not threaded, attach the appropriate

threaded clips to the holes that correspond to:

•

the mounting bracket tabs (front and back)

•

the locking bracket tabs (front only)

•

the temporary support screws (front and back)

Rack retma rail

0.5 in. (12.7 mm)

0.625 in. (16 mm)

Slide assembly Locking bracket

Insert temporary support screw here

Mounting bracket

1 rack unit

21 in. (54 cm

or 12 rack units)

minimum vertical

clearance required

0.5 in. (12.7 mm)

0.625 in. (16 mm)

0.5 in. (12.7 mm)

1 rack unit (1.75 in. / 4.45 cm)

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 131 132

Žádné komentáře

Quantum P1000 Uživatelská příručka Strana 115