Quantum PX720 Uživatelská příručka Strana 205

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 259
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 204
Chapter 3 Quantum PX720 Remote Management
Utilities
Quantum PX720 User’s Guide 182
To upload Fibre Channel bridge firmware:
1 Select the Upgrade check box for each bridge to be updated.
2 Enter a path and filename where the file exists, or click Browse.
3 Click Upload to upload the file.
The firmware image uploads to the library and reboots the bridge. A
progress window opens showing the current status of the firmware
upgrade.
4 After all bridges have been upgraded, click Refresh to rediscover
bridges and update the firmware revision.
Upgrade Drive Firmware 3
The upload drive firmware section allows the user to remotely upload
new drive firmware to the tape drive.
To upload tape drive firmware:
1 Enter a path and filename where the file exists, or click Browse to
locate the file.
2 Select the tape drive(s) to upgrade with new firmware. The file to be
uploaded must have a img extension.
3 Click Upload to upload the file.
After the file is uploaded, the drive(s) will be automatically upgraded
and then reset.
Note: The library must be offline to upgrade drive firmware.
Note: Only ADI enabled tape drives can be updated remotely.
Note: If multiple drives are selected, they must be of the same
type (all SDLT or all LTO). The tape drive upgrade process
takes approximately 30 minutes for each tape drive.
Zobrazit stránku 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 258 259

Komentáře k této Příručce

Žádné komentáře