Quantum Scalar 24 Specifikace stáhnout pdf (Strana 85)

Scalar 24 Installation and Operation Guide 77

Configure Partitions

Partitioning is used to allow your single Scalar 24 library to be logically partitioned so it will appear to a host

as if it were two independent physical libraries. Each logical library (partition) can be independently

controlled as though it were a separate library. The partitioning types available are random-sequential,

sequential-sequential, LUN-sequential, LUN-LUN, and sequential-LUN; random-random is not supported at

this time.

Partition 1 can operate in random, sequential, or LUN (LTO only) modes.

Partition 2 can operate in sequential or LUN (LTO only) modes.

The partition size is configurable. Each partition is assigned one of the front magazines but may have a

configurable number of rear slots (minimum 1) assigned. The first drive module is assigned to the first

partition and the second drive module is assigned to the second partition. If the library is not partitioned, all

data slots and drive modules are assigned to a single partition. Follow the procedure below to configure

partitions.

NOTE: Partition will only appear in the Configure Slots menu if you have specified Rnd-Seq, Seq-Seq,

LUN-Seq, Seq-LUN, or LUN-LUN mode. LUN modes can be specified only on libraries with LTO drives.

Otherwise your Scalar 24 will operate as a single library.

6 A confirmation screen displays. Press

to dismiss.

Selection Description/Result

1 From the Setup menu, highlight and

press .

Configures partitions.

2 Press and to select Partition.

3 Press to move to the next field.

Selection Description/Result

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 153 154

Žádné komentáře

Quantum Scalar 24 Specifikace Strana 85