Quantum Scalar i2000 Uživatelská příručka stáhnout pdf (Strana 41)

Chapter 3 System Specifications

Physical Specifications

Scalar i2000 Planning Guide 37

Control Module and

Expansion Module Pallet

Specifications 3

IEX Considerations 3

When adding expansion modules, you must consider IEX versions.

1 Take a snapshot of the library.

2 Find out what the IEX H/W Rev is for all the IEX board.

3 If any IEX H/W Rev is under 2, replace the IEX board.

4 If any IEX FW level is under 130, replace the IEX board.

Configuration One 3

The first configuration consists of the control module. The minimal

configuration contains one I/E station and one drive. Options include:

• Combination of up to 12 drives (LTO and SDLT can be mixed)

•Redundant power supply

A diagram of the first configuration is shown in figure 15 on page 38.

Physical specifications are listed in table 9 on page 38.

Table 8 Pallet Dimensions

Height Width Length

84 in.

2133.6 mm

41 in.

1041.4 mm

81 in.

2057.4 mm

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 76 77

Žádné komentáře

Quantum Scalar i2000 Uživatelská příručka Strana 41