Quantum TC-L53FN-AR Uživatelská příručka Strana 22

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 96
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 21
Chapter 2 Installation Procedures
Installing the Internal LTO-5 Tape Drive
8 LTO-5 Tape Drive User’s Guide
1 Visually inspect the shipping container and notify your carrier
immediately of any damage.
2 Place the shipping container on a flat, clean, stable surface and
carefully remove the contents.
3 Visually inspect the LTO-5 Tape Drive and notify your drive supplier’s
representative immediately of any damage.
4 Always save the shipping container and packing materials for any
future reshipment.
Installing the Internal LTO-5 Tape Drive
The installation of the internal LTO-5 tape drive differs depending on the
drive type: Half-Height or Full-Height. Refer to the following sections for
your drive type.
Installing the Internal LTO-5 Half-Height Tape Drive
Installing the Internal LTO-5 Full-Height Tape Drive
Installing the Internal
LTO-5 Half-Height Tape
Drive
To install the internal LTO-5 Half-Height Tape Drive, complete the
following procedures in the order presented:
1 Mounting the Internal Half-Height Tape Drive
on page 9
2 Connecting the Internal Half-Height Drive Interfaces
on page 11
3 Restarting the Internal Half-Height Tape Drive System
on page 12
4 Installing the LTO Driver Software
on page 19, if required
Zobrazit stránku 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 95 96

Komentáře k této Příručce

Žádné komentáře