Quantum DLT 2500 Servisní příručka stáhnout pdf (Strana 32)

Chapter 2: Installing the Sled-Mounted DLT2000XT Tape Drive

2. Identify the retaining screw that holds the drive shelf directly above the chosen

drive bay, and remove it with a Phillips screwdriver, as shown in Figure 2-5.

Note: The design of the drive housing precludes placing a DLT2000XT tape drive on

the third drive shelf down from the top, or the bottom drive shelf. Keep this in mind

when preparing for the installation (see Figure 2-7).

3. Pull the drive shelf straight out of the chassis, as shown in Figure 2-6.

Note: Retain the drive shelf if there is a possibility that you will need to install

half-height drives later.

Figure 2-6 Removing the Drive Shelf

SCSI backplane

Drive shelf

Filler plate

Drive shelf

retaining screw

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 113 114

Žádné komentáře

Quantum DLT 2500 Servisní příručka Strana 32