Quantum LTO-4 (Model B) Technické informace stáhnout pdf (Strana 2)

2 Before Installing the LTO-4 (Model B) Half-Height Tape Drive

Product Name Quick Start Guide

Before Installing the LTO-4 (Model B) Half-Height Tape Drive

Handling Precautions

and Installation

Guidelines

Always observe the following precautions and guidelines when handling and installing

LTO-4 (Model B) Half-Height Tape Drives:

• Internal, at all times

•Tabletop, when removed from its

free-standing enclosure

Handling Precautions

• Internal drives have exposed components that are

sensi

tive to static electricity. To reduce the possibility of

damage from static discharge, the drives are packaged

in a protective antistatic bag. Do not remove the drive

from the antistatic bag until you are ready to install it.

• Wear an ESD-preventive grounding wrist strap or

observe similar ESD

precautions when working with the

drive. Be sure the wrist strap makes good skin contact.

Do not remove the wrist strap until you finish working

with the drive.

• Before removing the drive from the antistatic bag, touch

a grounded metal

surface to discharge any static

electricity buildup from your body.

• Handle the drive by its sides rather

than by the top cover

to reduce the risk of dropping the drive or damaging it

during installation.

• Either lay the drive on a nonconductive surface or put it

bac

k inside the protective antistatic bag to reduce the

chance of damage from static discharge

Installation Guidelines

• Due to the high speed of the LTO-4 (Model B) Half-

ight Tape Drive, do not connect more than one LTO-4

(Model B) drive to the same host bus adapter (HBA).

Preinstallation

Requirements

Before installing the LTO-4 (Model B) Half-Height Tape Drive, make sure you have:

• A host bus adapter (HBA) installed and properl

y configured in the host computer:

• Parallel SCSI HBA for a parallel SCSI drive

• Serial SCSI HBA for a SAS drive

• Interface components:

• For a parallel SCSI drive, either internal or tabletop, a 68-pin parallel SC

SI cable

and terminator

Also, avoid contact between the drive

, other equipment,

and clothing. The wrist strap only protects the

equipment from ESD voltages on the body; ESD

voltages on clothing can still cause damage.

1 2 3 4 5 6 7 ... 17 18

Komentáře k této Příručce

Žádné komentáře

Quantum LTO-4 (Model B) Technické informace Strana 2

Komentáře k této Příručce

Související produkty a manuály pro Páskové jednotky Quantum LTO-4 (Model B)