14
5.10.8 Quick Turn off
If you are using the Qflash as an on-camera flash and want to disable the
flash for a few shots you can use the ‘quick turn off’ feature.
To activate the quick turn off feature press Mode I twice. The word ‘OFF’
will appear in the display. To return to normal operation press any button
(except Test M).
Note: This feature will only prevent the flash from firing; it will not turn off
the Qflash or the Turbo. To completely turn off the Qflash the Turbo must
be turned off.
5.10.9 Modeling Lamp
The Lamp button activates the modeling lamp. The lamp lights for sev-
eral seconds and shuts off.
Quantum’s QTTL
®
adapters provide a dedicated link between Qflash 4d
and popular digital and film cameras. QTTL D series adapters can support
the following camera functions, when supported by the camera:
IMPORTANT! With digital cameras perform a custom white balance
prior to a shooting session. Otherwise, the camera will assume you
are using some unknown flash.
6.1 Controls, Displays, and modes
Please refer to sections 5.1, 5.2, and 5.3 to operate the Mode I, Set G
and Up/Down JLbuttons.
Note that with D series adapters the film speed (ISO) and F# are con-
trolled by the camera. To change the F# or ISO adjust your camera.
With some cameras, press the shutter half way periodically to update
the F# and ISO information on the Qflash display.
6.2 Qflash in Manual mode
If Qflash is set to Manual mode using a QTTL adapter flash exposure is
fixed by the settings on Qflash. In Manual mode the following QTTL fea-
tures are available: Rear curtain sync (Section 6.5.1), Auto focus assist
(Section 6.5.2), Shutter speed control (Section 6.5.3), Ready light (Section
6.5.4).
6. Qflash OPERATION WITH QUANTUM
DEDICATED QTTL
®
ADAPTERS
Flash ready indication
in camera viewfinder
Rear Curtain Sync
TTL ratio / fill flash
Auto Fill ratio
Shutter speed control (camera
detects flash and sets shutter)
TTL flash control-both TTL and pre-flash metering
Auto focus assist
Full dedication
Komentáře k této Příručce