Quantum P7000 Uživatelská příručka stáhnout pdf (Strana 62)

Chapter 2 Basic Library Operations

Turning the Library On and Off

42 Quantum P4000 and P7000 Libraries User’s Guide

Turning the Library On and Off 2

This section explains how to:

• Turn on the library

• Place the library on-line or off-line

• Turn off the library

• Test the installation

Turning On the

Library 2

To turn on the library:

1 Verify that:

• Power cables are firmly in place

• All doors are closed

2 Turn on the power switch located behind the small sliding door

below the GUI.

3 After several seconds, verify that the current state of the library

(“System On-line” or “System Off-line”) appears in the System State

display on the GUI (see figure 24

Placing the Library

On-line or Off-line2

With the library turned on, press the Standby button on the GUI.

Pressing the

Standby button toggles the library between on-line and off-

line states.

Turning Off the

Library 2

To turn off the library:

1 Place the library off-line by pressing the

Standby button.

The library robotics completes any current commands and then

stops.

2 Verify that the GUI display indicates “System Off-line.”

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 167 168

Žádné komentáře

Quantum P7000 Uživatelská příručka Strana 62