Quantum TC2201 Uživatelská příručka stáhnout pdf (Strana 149)

Procedure A: EMC Legato NetWorker

Quantum TC2201 User’s Guide 129

Procedure A: EMC Legato NetWorker 1

1 Start the Windows Registry Editor program (as shown in figure 48) as

follows:

a a. Select Start>Run.

b b. Enter the following value in the Open text box: regedt32

c c. Press [Enter].

%SystemRoot%\Winnt\System32\regedt32.exe

2 Select Window> HKEY_LOCAL_MACHINE> System>

CurrentControlSet> Services> QntmDLT (or depending on

tape device being tested) to make that window active.

3 Select Edit>Add Key and enter Parameters for Key Name to create

a key named Parameters, if one does not exist.

4 To create a key named Device, open the Parameters key by selecting

Edit>Add Key and enter Device for Key Name.

5 To create a DWORD named MaximumSGList, open the Device key

by selecting Edit>DWORD and entering MaximumSGList for

DWORD Name.

6 Open the MaximumSGList Value Name and replace the existing

Value Data in Decimal with a number at least as large as the block

size you need for the device.

To calculate the value, use the following equation:

(Block_Size / 4) + 1 = Value

• 64k 17 decimal 11 hex

• 96k 25 decimal 19 hex

• 128k 33 decimal 21 hex

• 256k 65 decimal 41 hex

• 512k 129 decimal 81 hex

Note: You can also open this program at the following location:

Note: Block Size Decimal Value Hex Value:

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 163 164

Žádné komentáře

Quantum TC2201 Uživatelská příručka Strana 149