Quantum TC2201 Uživatelská příručka stáhnout pdf (Strana 92)

Power Up Messages

Quantum TC2201 User’s Guide 72

Power Up Messages 3

When you press the TC2201’s power switch to the ‘ON’ position (marked

with a ‘

I’ symbol), a series of messages similar to the following appear on

the terminal or terminal emulation program for the serial port (See “

Serial

Port Settings on page 14), or the Telnet utility for Telnet sessions.

A series of power-up self tests are performed while the TC2201 starts

(which can take up to 2 minutes), and messages related to these tests will

be visible from the serial port. If completed successfully, the main menu

will appear, as shown in Figure 7-1.

The main menu appears as follows:

Note: The illustrations in this chapter use Xs to represent numeric

values for certain data fields, such as the product release

version and the revision of firmware.

Note: For the serial port, if you do not see messages over the

Command Line Interface, you may need to re-check your

computer’s serial port settings.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 163 164

Žádné komentáře

Quantum TC2201 Uživatelská příručka Strana 92