Quantum 200D/400D Uživatelská příručka stáhnout pdf (Strana 40)

28 Troubleshooting and Diagnostics

3. Press and hold the Unload button for two seconds to select Drive R/W Diagnostics.

The front panel indicators will display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

1, flashing

LCD

Drive R/W Diagnostic

Drive Self Test

After 60 seconds the front panel indicators will display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

C, flashing

LCD

Drive R/W Diagnostic

Load Scratch Tape

4. Within 60 seconds, insert a scratch data cartridge that is not write-protected into the drive (or the drive will exit

Maintenance Mode). Refer to Convert FMR Tape to Scratch Tape elsewhere in this chapter for a description of a

valid scratch data tape.

Caution

Data on the cartridge will be overwritten. Insert only a scratch data cartridge for

these tests.

After you insert the cartridge, the front panel indicators will display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

1, flashing

Drive R/W Diagnostic

Writing =====

which alternates with:

Drive R/W Diagnostic

Locating =====

After several minutes:

Drive R/W Diagnostic

Reading =====

which alternates with:

Drive R/W Diagnostic

Locating =====

LCD

until the test finishes.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 64 65

Komentáře k této Příručce

Žádné komentáře

Quantum 200D/400D Uživatelská příručka Strana 40

Komentáře k této Příručce

Související produkty a manuály pro Prázdné datové pásky Quantum 200D/400D