Quantum 200D/400D Uživatelská příručka stáhnout pdf (Strana 51)

Troubleshooting and Diagnostics 39

Display Error Code Log

Use this function to display the last 10 error codes, one at a time (the codes are ordered; the most recent is presented first and the oldest–

tenth–is presented last.)

To select the Display Error Code Log function, perform the following steps:

1. Verify that the drive is in Maintenance Mode by observing that the Status LED is illuminated solid amber.

2. Press the Unload button once per second until the front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

LCD

Maint Mode: Select

Display Err Code Log

3. Press and hold the Unload button for two seconds to select Display Error Code Log. The front panel indicators display

the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

9, flashing

LCD

Display Err Code Log

0. Media Error

4. After you select this function:

Press the Unload button to view the most recent error code.

Press the Unload button again to view the successive error codes.

If you press the Unload button after the tenth error code is shown, the drive will exit this function as well as the

Maintenance Mode function.

If there are no errors in the log, the front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

LCD

Maint Mode: Select

Exit Maint Mode

5. To exit this function and Maintenance Mode, press and hold the Unload button for two seconds.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 64 65

Žádné komentáře

Quantum 200D/400D Uživatelská příručka Strana 51