Quantum Scalar 100 Uživatelská příručka Strana 69

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 130
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 68
Scalar 100 User’s Guide 61
Moving the Picker
When working with your library, you may want to move the picker to specific location in the library so that
you can have an unobstructed view of an area or so that you can gain access to a particular spot in the
library. To move the picker to a specific location, use Move Picker.
Path: Main Menu > Command > Move > Position Picker
1 From the main menu, select Command and then select Move. Select Position Picker.
2 With Select Column selected, press Change Column until the arrow points to the target column. Press
Next.
3 With Magazine selected, select Change Magazine until the arrow points to the target magazine. Press
Next.
4 With Slot Parameter active, press Change Slot until the arrow points to the target slot.
The Select TARGET line displays the target location. For example, the display below has slot 1C3
selected as the target.
5 When the correct location is selected, select OK.
The picker is moved to the specified location.
Taking Inventory
Periodically, you may need to take inventory of the tape cartridges in the library outside of the initial TEACH
and INVENTORY that occurs at startup or when the door or mailbox are opened. For example, if there is a
discrepancy between the number and location of tape cartridges in the library, you may want to take
inventory to re-establish these values. Scan Barcode allows you to take inventory of the entire library or a
specific set of tape cartridges.
Zobrazit stránku 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 129 130

Komentáře k této Příručce

Žádné komentáře