Quantum Scalar 100 Uživatelská příručka Strana 90
- Strana / 130
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
82 Maintaining your Library
2 Select OK.
The library is calibrated.
3 When complete, select OK.
Resetting a Drive
Use the Reset command if you want to reset a drive and not interfere with other library functions. There are
two reset options: soft resets and hard resets. A soft reset is used in instances where you want restart a
drive, for example if you want to invoke a new Loop or SCSI ID. Hard resets are used when there are drive
errors.
Path: Main Menu > Command > Drives > Reset
1 From the main menu, select Command and then select Drives. Select Reset.
2 Using Change, select the drive to be reset or select ALL to reset all the drives. Select Next.
3 Using Change, select the type of reset: soft or hard.
A soft reset runs the drive’s power-on self test. A hard reset first turns off then restarts the drive. In most
cases, a soft reset is preferable to a hard reset.
4 Select OK.
Servicing Drives
Use Drives when performing maintenance on drives. Only LTO drives can be serviced. This menu allows
you to:
• Discontinue or reinitialize communication with a drive (this is necessary when replacing a drive).
• Run diagnostic tests on your drive (for use by service personnel).
Preparing a Drive
Before you prepare a drive, the host may have to be disconnected. For more information on preparing your
host, refer to
Preparing the Host on page 18. Use Repair when you are replacing a drive. Repair informs
the library that the drive is going to be removed from the library. There is no communication with the drive
until it is replaced.
Path: Main Menu > More > Service > Drives > (select drive) > Repair
1 From the main menu, select More. Select Service and then select Drives.
2 Specify the drive you want to replace in the Drive field. Select Change Drive until the desired drive is
selected.
- 100 User’s Guide 1
- Contents 3
- 5 Using the Operator Panel 37 4
- 6 Getting Information 47 4
- 7 Running your Library 59 5
- 8 Configuring your Library 67 5
- 9 Maintaining your Library 75 5
- 13 Specifications 111 7
- Product Safety Statements 9
- Product Model Number 9
- Description 11
- Front Panel Components 12
- Back Panel Components 13
- 6 Description 14
- Rear Power Switch 15
- Internal Components 16
- Tape Magazines 17
- Slot Numbering 17
- Drive Module Numbering 18
- Host Attachment 19
- 12 Description 20
- Setting up your Scalar 100 21
- Finding a Location 22
- Unpacking your Library 22
- Scalar 100 User’s Guide 15 23
- 16 Setting up your Scalar 100 24
- Scalar 100 User’s Guide 17 25
- Preparing the Host 26
- Host Coordinate System 27
- Installing a SCSI Adapter 27
- Installing Drivers 27
- 20 Setting up your Scalar 100 28
- Scalar 100 User’s Guide 21 29
- 22 Setting up your Scalar 100 30
- Using the Optional Features 31
- Scalar 100 User’s Guide 25 33
- Installing Side Panels 34
- Installing Casters 35
- Installing/Removing Drives 35
- Removing a Drive 36
- Replacing a Drive 37
- Installing Bulk Load Mailbox 38
- Removing the Standard Mailbox 39
- Installing a Storage Column 41
- Partitioning Your Library 42
- Configuring AutoCleaning 42
- Working with AutoClean 43
- Using the Operator Panel 45
- 38 Using the Operator Panel 46
- Scalar 100 User’s Guide 39 47
- 40 Using the Operator Panel 48
- Working with Buttons 49
- Getting Library Messages 49
- Getting Mailbox Status 49
- 42 Using the Operator Panel 50
- Menu Guidelines 51
- Using the Main Menu 52
- The Menu Tree 52
- Scalar 100 User’s Guide 45 53
- 46 Using the Operator Panel 54
- Getting Information 55
- 48 Getting Information 56
- Getting Sensor Information 57
- Getting Slot Information 58
- Scalar 100 User’s Guide 51 59
- Viewing Drive Information 60
- Getting Logs 61
- Getting the Command Logs 62
- Getting Error Logs 62
- Getting Drive Logs 62
- Clear Log 63
- Force Dump 63
- Copy Dump 64
- Preserve Dump Dialog 64
- Scalar 100 User’s Guide 57 65
- 58 Getting Information 66
- Running your Library 67
- Moving Tape Cartridges 68
- Moving the Picker 69
- Taking Inventory 69
- 62 Running your Library 70
- Importing Tape Cartridges 71
- Exporting a Tape Cartridge 71
- 64 Running your Library 72
- Working with Drives 73
- Unloading a Drive 74
- Configuring your Library 75
- 68 Configuring your Library 76
- Scalar 100 User’s Guide 69 77
- Configuring Barcode Length 78
- Setting Drive SCSI IDs 79
- Setting Drive Loop IDs 80
- Setting the Date and Time 80
- Locking/Unlocking the Mailbox 81
- 74 Configuring your Library 82
- Maintaining your Library 83
- Updating Drive Firmware 84
- Exercising the Picker Fingers 85
- 78 Maintaining your Library 86
- Exercising the Picker Axes 87
- Exercising the Library 88
- Running a Self Test 89
- Teaching the Library 89
- Resetting a Drive 90
- Servicing Drives 90
- Scalar 100 User’s Guide 83 91
- 84 Maintaining your Library 92
- Tape Use Guidelines 93
- Using Barcode Labels 94
- Scalar 100 User’s Guide 87 95
- Scalar 100 User’s Guide 89 97
- Supported Browsers 98
- RMU Requirements 98
- Setting up the RMU 98
- Starting the RMU 99
- Logging into the RMU 99
- Configuring SNMP 100
- Configuring RMU User Accounts 100
- Configuring the Time and Date 101
- Updating Firmware 102
- Viewing Diagnostic Files 102
- Viewing Logs 103
- Getting Help 103
- Replacing the RMU 103
- Troubleshooting and Help 105
- 98 Troubleshooting and Help 106
- Scalar 100 User’s Guide 99 107
- 100 Troubleshooting and Help 108
- Scalar 100 User’s Guide 101 109
- 102 Troubleshooting and Help 110
- Scalar 100 User’s Guide 103 111
- 104 Troubleshooting and Help 112
- Scalar 100 User’s Guide 105 113
- 106 Troubleshooting and Help 114
- Scalar 100 User’s Guide 107 115
- 108 Troubleshooting and Help 116
- Operator Information Messages 117
- Interpreting Drive LEDs 118
- Specifications 119
- Tape Cartridge Capacity 120
- Drive Capacity 120
- Scalar 100 User’s Guide 113 121
- SDLT/DLT 122
- Scalar 100 User’s Guide 115 123
- 116 Specifications 124
- Scalar 100 User’s Guide 117 125
- 118 Index 126
- Scalar 100 User’s Guide 119 127
- 120 Index 128
- Scalar 100 User’s Guide 121 129
- 122 Index 130
Související produkty a manuály pro Páskové automatické zavaděče a knihovny Quantum Scalar 100
(168 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.024 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce